• Powerful motor with over-current protection to prevent burnout
• Kickback protection system, anti-restart protection and soft start provide greater operator safety
• Auto mode reduces no-load noise and vibration
• Resin coated components and mesh filters for extra protection against dust and moisture
• Compact body and small grip circumference
• Large two stage paddle switch (dead man action)
The HiKOKI G18DSL Cordless Angle Grinder with multiplex protection circuit to maximise battery life. Has a high torque design and a low gear cover height for easier access to confined areas. It has replaceable carbon brushes, a side mounted switch and a low battery indicator. Its slimline, soft grip enhances user comfort.
G18DSL/JJZ: 2 x 18V 5.0Ah Li-ion Batteries
G18DSL/W4Z: Bare Unit, No Battery or Charger
• Large FETs and highly durable electronic circuitry
• High tool durability via low friction motor, which produces less heat
• Up to 50% increased run time per battery for more work with less downtime
• Over-current protection
• Smallest body & grip circumference, most lightweight in its class
• Best in class cutting performance per charge
• Powerful brushless motor - Torque Up to 60% higher
• AUTO Mode function reduces noise and vibration in no-load operation
• Dust and water-resistant construction that remarkably increases durability
• Electronic control - Kickback protection system, anti-restart protection and soft start
• Large FETs and highly durable electronic circuitry
• High tool durability via low friction motor, which produces less heat
• Up to 50% increased run time per battery for more work with less downtime
• Over-current protection
• Smallest body & grip circumference, most lightweight in its class
• Best in class cutting performance per charge
• Powerful brushless motor - Torque Up to 60% higher
• AUTO Mode function reduces noise and vibration in no-load operation
• Dust and water-resistant construction that remarkably increases durability
• Electronic control - Kickback protection system, anti-restart protection and soft start
• Delivers the power of a mains tool with the convenience of cordless
• Multi Volt batteries for high power output similar to mains powered tools
• Batteries are compatible with existing Hitachi 18V tools
• Brushless motor for reduced maintenance and longer life
• Soft start
• Brake system for extra safety
• Auto mode reduces noise when not under load
• Overload protection
• Anti-restart protection circuit stops the grinder from accidentally restarting
• Soft start
• Dust and water resistant construction
HiKOKI M12VE 1/2in Variable Speed Router 2000W 240V M12VE
M12VE 1/2in Variable Speed Router
240 Volt Version
The HiKOKI M12VE 1/2in Variable Speed Router has a compact, lightweight design and a powerful, variable speed motor with constant speed control. Fitted with a convenient variable speed dial and adjustable handles that can be set for optimum user comfort.
Supplied with: 1 x 1/2in Collet Chuck, 1 x 1/4in Collet Chuck, 1 x Straight Guide, 1 x 30mm Template Guide, 1 x Wrench, 1 x Carrying Case
Approx. 62.5 min* runtime per charge with the BSL36A18 MULTI VOLT battery
Triple-edged and double-sided blade cuts well
Four speed settings
Ergonomic shaped sub handle and soft-grip main handle for comfortable hedge cutting in any working position
Durable aluminum bottom cover
The value is for reference purposes. It may vary according to the operating conditions.
HiKOKI P18DSL/W4Z Cordless Planer 18V Bare Unit P18DSL/W4Z
The HiKOKI P18DSL Planer is ideal for professional carpenters and has a robust design with a high-speed motor that gives a fine finish in all materials. It has a maximum cutting depth of 2mm for quick stock removal.
Equipped with a safety brake, when the switch trigger is released, the brake stops the blade rotation automatically. The built-in blade stand prevents damage to blades or worktop, prolonging tool life. Fitted with a soft grip handle for increased user comfort.
HiKOKI RB36DA/JLZ MultiVolt Cordless Blower - 36V
From Hitachi comes their latest products under the new HiKOKI name.
The HiKOKI RB36DA/JLZ MultiVolt Cordless Blower Incorporates variable voltage output from the same 5Ah Battery.
Specifications:
Full load rotational speed (when fully air-conditioned at 20 ° C) - 0 to 24,000 Per Min
wind speed m/s - 0 to 45 (at turbo mode: 53)
Air flow m 3/h - 0 to 680 (in turbo mode: 800)
Product Dimensions - 940 × 267 × 242mm (with battery installed)
Product weight - 3.5Kg (with battery installed)
• Built-in protection storage case for smartphone
• Bluetooth wireless technology
• DAB/DAB+ receiver
• IPX4 water resistance
• Audio playback
• USB charging function
• Folding FM rubber antenna, and built-in ferrite bar AM antenna
• Compatible with the range of Hitachi 18V slide Li-Ion batteries from 1.5Ah to 6.0Ah
• Can be operated with the included AC adapter
• High power brushless motor with maximum tightening torque of 207Nm (hard)
• I P56 rating for dust resistance & waterproofing
• Triple hammer mechanism: three anvils for higher power and extended life
• 4 mode speed selection for a variety of jobs: Sm: soft mode (delicate work), Nm: normal mode, Pm: power mode (heavy work), SEm: self-drilling screws
• Electric brake
• 3 mode LED worklight: always on/automatic/always off
• Soft grip handle
• Forward & reverse switch
• Side hook can be fitted on right or left
• High performance impact driver with high efficiency brushless motor.
• Consistent driving throughout battery charge with minimal speed loss.
• Industry leading performance*.
• High power brushless motor with maximum tightening torque of 210Nm (hard).
• IP56 rating for dust resistance & waterproofing
• Triple hammer mechanism: three anvils for higher power and extended life
• 4 mode speed selection for a variety of jobs.
• Electric brake
• 3 mode LED worklight: always on/automatic/always off.
• Soft grip handle.
• Forward & reverse switch
• Side hook can be fitted on right or left.
• High performance impact driver with high efficiency brushless motor.
• Consistent driving throughout battery charge with minimal speed loss.
• Industry leading performance*.
• High power brushless motor with maximum tightening torque of 210Nm (hard).
• IP56 rating for dust resistance & waterproofing
• Triple hammer mechanism: three anvils for higher power and extended life
• 4 mode speed selection for a variety of jobs.
• Electric brake
• 3 mode LED worklight: always on/automatic/always off.
• Soft grip handle.
• Forward & reverse switch
• Side hook can be fitted on right or left.
• High power brushless motor with huge maximum tightening torque of 305Nm (hard)
• Brushless motor for increased run time and durability
• IP56 rating for dust resistance & waterproofing
• Compact & lightweight design
• 4 mode speed selection for a variety of jobs
• 3 mode LED worklight: always on/automatic/always off
• High power brushless motor with huge maximum tightening torque of 305Nm (hard)
• Brushless motor for increased run time and durability
• IP56 rating for dust resistance & waterproofing
• Compact & lightweight design
• 4 mode speed selection for a variety of jobs
• 3 mode LED worklight: always on/automatic/always off
• Heavy duty impact wrench
• High tightening torque of 255Nm (hard)
• Power mode for heavy duty work
• Safe mode for smaller jobs (140Nm)
• Only 173mm body length
• White LED spotlight
• Battery level indicator
• 1/2 Inch square drive
• Socket not included
• For 12.7mm(1/2") square drive
• High capacity 6.0Ah Lithium-ion battery
• Powerful tightening/loosening torque of 480Nm (4,250in.-lbs.)
• Includes 2 slide Lithium-ion batteries and charger
• Remaining battery indicator lamp
• Forward-reverse rocker switch
• LED light on body
• High efficiency brushless motor
• Batteries are compatible with existing Hikoki 18V tools
• High overload capacity
• Huge tightening torque of 1050Nm (hard)
• 4 mode power selection
• IP56 rating for dust resistance & waterproofing
• Electric brake
• 3 mode LED worklight: always on/automatic/always off
• Rubber nose protector
• Forward & reverse switch
• High efficiency brushless motor
• Batteries are compatible with existing Hitachi 18V tools
• High overload capacity
• Huge tightening torque of 1050Nm (hard)
• 4 mode power selection
• IP56 rating for dust resistance & waterproofing
• Electric brake
• 3 mode LED worklight: always on/automatic/always off
• Rubber nose protector
• Forward & reverse switch
• High performance impact wrench with high efficiency brushless motor
• 36V Multi Volt batteries for high power output similar to mains powered tools
• Batteries are compatible with existing Hitachi 18V tools
• High overload capacity
• Huge tightening torque of 1050Nm (hard)
• 4 mode power selection
• IP56 rating for dust resistance & waterproofing
• Compact design
• Electric brake
• 3 mode LED worklight: always on/automatic/always off
• Soft grip handle
• Rubber nose protector
• Forward & reverse switch
• Large side hook can be fitted on right or left
18V brushless combi drill complete with 2 x 5.0ah Multivolt Li-ion batteries
• 6.0Ah Li-Ion batteries with multifunction protection circuit
• High maximum torque of 136Nm
• Fast charger with 38 minute charge time
• Reactive Force Control (RFC) safety feature
• Brushless motor
• High performance Röhm chuck with spindle lock
• 22 stage torque setting
• Robust aluminium gear case
• Built-in LED work light