Features:
-The dual position outlet on the LB480 and LB800, gives the option of either verticle or non kink horizontal pumping.
-Designed to operate for extended periods in seepage conditions.
-Available with or without a float switch.
-The LB series are extremely robust, compact contractor pumps, that have a 50mm (2”) outlet and a tough pressed steel strainer base and body.
-A choice of 0.48kW, 0.75kW and 1.5kW motors assist cost effective pump selection.
-They all offer excellent durability during periods of continuous use and/or operator abuse.
-The LB-480 and LB-800 models incorporate a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking, while the LB-1500 has a single position outlet only.
-A combination of a rubber pump chamber, rubber wear plate and a urethane (chromium iron on LB-1500) vortex impeller provides excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.
-All three models use a 403 stainless steel shaft that is fitted with an ultra hardwearing double mechanical seal (inboard: silicon carbide-silicon carbide) which runs in an oil chamber that has an oil lifter to maintain seal lubrication during operation in any position.
-This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water.
-Considered the “hire industry standard”, earlier models of the LB-480 have been used in this trade since the mid-70’s. Supplied with 10 metres of heavy duty rubber power cable.
-Available in single-phase only, with an optional pendant type float switch on the LB-480 and LB-800. For the more compact sump, electronic probe type and tube type float switches are also available.