Features:
Brass Head
Built-in Uniflow Unloader and Chemical injector with Inner Stainless Steel Parts
Abrasion Proof, Heat Resistant, Industrial ceramic Plungers
Stainless Steel Unitized Check Valves
Forged Brass Manifold
Industrial Duty Construction for Extended Life
Patent Registered Ball Bearing Design
Built-in Garden Hose Adapter
Double-Sealing Buna-Textile U- Packing
3/4” HOLLOW SHAFT with flange for coupling to petrol engines
The Maxflow 19" Rotary Surface Cleaner makes it quick and easy for the operator to clean walkways, patios, decks, driveways, pavements, and parking areas. This surface cleaner contains steel two arm rotary bar and a polypropylene cover that keeps spray away from the operator. Its rotary head maximizes performance, minimising cleaning time by up to 60%. Ideal for professionals
2 nozzle spray arm, great for all flat floor surfaces
Quick and easy clean, easy-trigger gun
9.5 lpm min. flow rate
30 lpm max. flow rate
Rotary head contributes to optimal performance
Nylon brush skirt minimizes overspray without compromising smooth hovering action
Polypropylene cover is lightweight and durable. It channels the water flow out to the front, away from the operator
Complete with Castors
Gun suitable for use with 500 bar – 50 MPa / 7000 PSI rated pressure pumps. Sturdy constructionin stainless steel & brass with dynamic teflon seals. Ergonomic construction with minimum fatigue for trigger opening and reduced pressure loss.
Hawk NHD series 1450rpm pump (24mm male shaft) producing 14lpm at a pressure of 150bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve
Hawk NHD series (24mm male shaft) 1450rpm pump producing 12lpm at a pressure of 150bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve
Hawk NHD series 1450rpm pump (28mm hollow shaft) )producing 14lpm at a pressure of 150bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve, this pump comes fitted with a hollow flange designed to fit electric motors with the coupling MEC100/112
The Original BE 20" Whirlaway Rotary Surface Cleaner makes it quick and easy for the operator to clean walkways, patios, decks, driveways, pavements, and parking areas. This surface cleaner contains steel two arm rotary bar and a polypropylene cover that keeps spray away from the operator. Its rotary head maximizes performance, minimising cleaning time by up to 60%. Ideal for professionals
Features:
2 nozzle spray arm, great for all flat floor surfaces
Quick and easy cleaning with easy-trigger gun
Rotary head contributes to optimal performance
Maximum Flow Rate (L/min) 30
Minimum Flow Rate (L/min) 9.5
Nylon brush skirt minimizes overspray without compromising smooth hovering action
Polypropylene cover is lightweight and durable spraying water away from operator
Hawk NMT series (24mm male shaft) 1450rpm pump producing 21lpm at a pressure of 200bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve
The SIP CW2800 Electric Pressure Washer is fitted with a 2800w brushless induction motor, variable water pressure, and a heavy-duty axial pump for added performance and service life.
Features:
Brass Head
Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar
One Piece, Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
The Original BE 20" Whirlaway Rotary Surface Cleaner makes it quick and easy for the operator to clean walkways, patios, decks, driveways, pavements, and parking areas. This surface cleaner contains steel two arm rotary bar and a stainless steel cover that keeps spray away from the operator. Its rotary head maximizes performance, minimising cleaning time by up to 60%. Ideal for professionals
2 nozzle spray arm, Great for all flat floor surfaces
Quick and easy clean, Easy-trigger gun, once pulled half-way, becomes easy to hold
Minimum Flow Rate (L/Min) 9.5
Maximum Flow Rate (L/min) 30
Rotary head contributes to optimal performance
Nylon brush skirt minimizes overspray without compromising smooth hovering action
Stainless steel cover is durable and long lasting. It channels the water flow out to the front, away from the operator
Features:
Brass Head
Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar
One Piece, Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
The Maxflow 20" Rotary Surface Cleaner makes it quick and easy for the operator to clean walkways, patios, decks, driveways, pavements, and parking areas. This surface cleaner contains steel two arm rotary bar and a stainless steel cover that keeps spray away from the operator. Its rotary head maximizes performance, minimising cleaning time by up to 60%. Ideal for professionals
2 nozzle spray arm, great for all flat floor surfaces
Quick and easy clean, easy-trigger gun
9.5 lpm min. flow rate
30 lpm max. flow rate
Rotary head contributes to optimal performance
Nylon brush skirt minimizes overspray without compromising smooth hovering action
Stainless steel cover is durable and long lasting. It channels the water flow out to the front, away from the operator
Complete with Castors
Features:
Brass Head
Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar
One Piece, Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
SIP TEMPEST CW-P 225AX Petrol Pressure Washer 08986
The SIP TEMPEST CW-P 225AX Petrol Pressure Washer is a powerful engine-driven pressure washer designed to deliver more cleaning power, without the restraints of electrical models. No mains water supply? Not a problem as all SIP TEMPEST CW models are capable of sucking from a butt, barrel, or even a garden pond!
Coming with interchangeable nozzles and set on a sturdy frame with fitted wheels, it is perfect for professional use, particularly for valeting, agriculture and engineering workshops, machine parts, and most outdoor hard surfaces.
The Original BE 24" Whirlaway Rotary Surface Cleaner makes it quick and easy for the operator to clean walkways, patios, decks, driveways, pavements, and parking areas. This surface cleaner contains steel three arm rotary bar and a stainless steel cover that keeps spray away from the operator. Its rotary head maximizes performance, minimising cleaning time by up to 60%. Ideal for professionals
3 nozzle spray arm, Great for all flat floor surfaces
Quick and easy clean, Easy-trigger gun, once pulled half-way, becomes easy to hold
Maximum Flow Rate (L/min) 30
Minimum Flow Rate (L/min) 14
Rotary head contributes to optimal performance
Nylon brush skirt minimizes overspray without compromising smooth hovering action
Stainless steel cover is durable and long lasting. It channels the water flow out to the front, away from the operator
3 x 25° nozzles, 025, 1/4"
Features:
Brass Head
Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar
One Piece, Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
Hawk NLT series 1000rpm PTO pump (24mm male shaft) producing 25lpm at a pressure of 250bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for PTO applications, will run on 540rpm shaft if nozzle size is matched to suit, designed for use with external unloader valve
Maxflow cold water pressure washer powered by a Loncin G200 petrol engine. Featuring a premium series Comet pump, this machine produces 11 litres per minute water flow at a pressure of 140 bar. Includes chemical pick up hose complete with filter, and adjustable pressure nozzle for chemical application
Features:
Recoil start
Direct drive
Compact and convenient low profile frame
10 meter 2 wire hose
Includes hand gun, 900 mm lance and nozzle
Blue Series Commecial cold wash designed for domestic use. Ideal for basic home maintenance and car care
Features:
Comet electrical pump with three axial pistons arranged vertically with pump at the bottom and an all-metal construction without any plastic used for the structural components
Equipped with a brass pump head and detergent
Suction straight from a 1.8 litre capacity tank
EASY-START device
TotalStop device
Manually resettable amperometric protection
Pressure gauge
Water inlet quick coupling
Blue Series Commecial cold wash designed for the home user requiring a little more 'oomph'
Features:
Hose reel (Extra only) located at the bottom of the high- pressure water cleaner guaranteeing exceptional stability also when in use
Low-pressure detergent suction from the internal tank Detergent suction kit from an external tank (on request) Power cable storage rear compartment
Comet electrical pump with three axial pistons arranged vertically with pump at the bottom and an all-metal construction without any plastic used for the structural components
Pump with brass head
EASY-START device
TotalStop device
Motor thermal protection
Variable 3135psi (216bar) high pressure water jet and variable 522ltr/hr flow rate
Heavy-duty brass-headed Axial pump with adjustable pressure
Easy pull-start petrol engine for high performance
Sturdy frame with foam grip handle and fitted with wheels
Ready-to-go straight out the box
The SIP TP760/190 is a petrol-driven pressure washer fitted with a brass-headed pump, and a space-saving and power-coated frame, making it particularly ideal for contractors and farming use.
The SIP PP570/150WM is built with a powerful Kohler engine and a Quad Clean heavy-duty cyclonic air cleaner, and a space-saving powder-coated folding frame with large pneumatic tyres.
Complete with suction kit, oil funnel & turbo nozzle. Heavy duty.
Collapsible design for easy storage
Direct drive triplex pump
Powered by MacGen
Turbo nozzle delivers up to 3600psi effective cleaning power
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
- Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
Maxflow P.T.O. driven pressure washer features a premium series direct drive Hawk pump. Produces up to 25 litres per minute water flow at a pressure of 250 bar. Includes P.T.O. shaft, chemical pick up hose complete with filter, and adjustable pressure nozzle for chemical application.
Features:
Sturdy 4-legged galvanised frame
Two stage filtration system
3m suction hose & 'bypass to tank' function
10m 2 wire hose
Includes hand gun, 900 mm lance and nozzle
The SIP TPHGP570/150 is a petrol pressure washer fitted with a Honda™ engine, and a large space-saving powder-coated frame. It features a brass-headed pump and a heavy-duty metal lance.
Maxflow cold water pressure washer powered by a Loncin G200 petrol engine. Featuring a premium series Comet pump, this machine produces 14 litres per minute water flow at a pressure of 150 bar. Includes chemical pick up hose complete with filter, and adjustable pressure nozzle for chemical application
Features:
Recoil start
Gearbox driven
Compact and convenient low profile frame
10 meter 2 wire hose
Includes hand gun, 900 mm lance and nozzle
Maxflow P.T.O. driven pressure washer features a premium series direct drive Hawk pump. Produces up to 30 litres per minute water flow at a pressure of 200 bar. Includes P.T.O. shaft, chemical pick up hose complete with filter, and adjustable pressure nozzle for chemical application.
Features:
Sturdy 4-legged galvanised frame
Two stage filtration system
3m suction hose & 'bypass to tank' function
10m 2 wire hose
Includes hand gun, 900 mm lance and nozzle
The SIP TPHGP760/190 is a petrol pressure washer fitted with a Honda™ engine, and a large space-saving powder-coated frame. It features a brass-headed pump and a heavy-duty metal lance.
The SIP PP660/165WM is built with a powerful Kohler engine and a Quad Clean heavy-duty cyclonic air cleaner, and a space-saving powder-coated folding frame with large pneumatic tyres.